Pressure Blowers - Windsor

Pressure Blowers.

Pressure Blower Fans

New York Blower Pressure blowers are available in a range of formats, different materials and for a wide range of applications.

Optimized for high static pressure systems, where conventional fans might run out of breath.
Materials handling, process exhaust air, high temperature applications.
Normally these fans use radial tip and radial blade.
Available in special configurations for highly corrosive air applications.

The type of industrial high-pressure blower selected will depend on the system requirements and temperature specifications.

Some high-pressure applications where our range of pressure blowers are ideal include pneumatic-conveying, combustion, and gas-handling systems.

Pressure Blowers with open style steel wheels can also be used in systems handling, smoke, gases, or light non-abrasive dust.

Please contact our Auckland office for further assistance >

Please note: We reserve the right to update information on these pages at any time, always check details with our office.

NYB Compact Pressure Blowers

NYB Compact Pressure Blowers are designed for small & low pressure industrial processes such as glove boxes, combustion air, dust collection, fume control, carbon systems, quench cooling, oven exhaust and conveying.

The open radial wheel design makes it ideally suited for both clean air and material handling applications.

4 sizes of outlet, 6 sizes of inlet
Airflows up to 1.89m3/s
Pressures to 5.7kPa
Temperatures to 315deg C

Available in Carbon Steel, Stainless Steel, Aluminum, Special Alloys

NYB Pressure Blowers

Typical uses for NYB Pressure Blowers include dust collection, pneumatic-conveying, moisture blow-off, incineration and oven, and dryer exhaust.

13 sizes from 356mm - 660mm
Airflows up to 2.46m3/s
Pressures to 14.5kPa
Temperatures to 315deg C

Available in Carbon Steel, Stainless Steel, Special Alloys

NYB Open Wheel Pressure Blowers

The NYB Open Wheel Pressure Blower wheels are ideal for efficiently handling smoke, gases, light non-abrasive dust or short strand material that might otherwise get caught up on a shrouded wheel.

13 sizes from 356mm - 660mm
Airflows up to 2.46m3/s
Pressures to 14.5kPa
Temperatures to 315deg C

Available in Carbon Steel, Stainless Steel, Special Alloys

NYB HP Pressure Blowers

NYB HP ( High Pressure) Pressure Blowers typical uses include dust collection, pneumatic-conveying, scrubber exhaust, oxidation and oven and dryer exhaust.

13 sizes from 356mm - 660mm
Airflows up to 9.44m3/s
Pressures to 32kPa
Temperatures to 315deg C

Available in Carbon Steel, Stainless Steel, Special Alloys

NYB Surge Limiting Pressure Blowers

NYB Surge Limiting Pressure Blowers are designed for high pressure, low flow, industrial-process applications. Unique wheel and housing design minimizes surge without the need for auxiliary equipment /accessories when process conditions approach shutoff.

Numerous modifications and accessories make the NYB Surge Limiting Pressure Blower suitable for a wide range of systems.

16 sizes from 560mm - 2490mm
Airflows up to 14.2m3/s
Pressures to 45kPa
Temperatures to 650deg C

Available in Carbon Steel, Stainless Steel, Special Alloys

NYB Backward Curved Pressure Blower

NYB Backward Curved Pressure Blowers are designed for high-pressure, industrial-process applications. All applications can be handled in either induced-draft or forced-draft configurations.

Numerous modifications and accessories make the NYB BC Pressure Blower suitable for a wide range of systems.

10 sizes from 610mm - 1854mm
Airflows up to 37.8m3/s
Pressures to 27.4kPa
Temperatures to 423deg C

Available in Carbon Steel, Stainless Steel, Special Alloys

Quality Pressure Blowers and other packaged fan types available off the shelf, fitted with New Zealand Standard motors and including provisions for hazardous environments.

These direct drive blowers can be a perfect balance of performance and economy applications and performances.

Many suppliers and models available.

Please contact our Auckland office for further assistance >

Typical Applications

Combustion
Food & dairy applications using stainless steel components and special seals
Materials handling
Process exhaust air

Typical uses include dust collection, pneumatic-conveying, scrubber exhaust, oxidation and oven and dryer exhaust.

Direct Drive Pressure Blowers

The fan impellor is mounted directly on the motor shaft

Not suitable for high temperature handling applications due to direct drive motor shaft in the airstream

Lowest initital cost

Belt Driven Pressure Plowers

The fan impellor is mounted on a shaft & bearing assembly with motor attached by vee-belt drive

Can be used for high temperature applications with shaft cooler

Performance can be altered with vee-belt drive change

Higher maintenance cost

Coupling Drive Pressure Blowers

The fan impellor is mounted on a shaft & bearing assembly with motor attached by coupling

Can be used for high temperature applications with shaft cooler

Lowest maintenance cost

Back